Specifications

Chapter 26: Making Selections 573
To make a selection with the Edit Selection
indicators:
1 Click with the Selector tool in the track you
want to select.
2 Click in the Start field at the top of the Edit win-
dow.
3 Type in the start point for the selection and press
the Forward Slash key (/) to enter the value and
automatically move to the end field.
4 Type in the end point for the selection and press
Enter to accept the value.
Numeric Entry Shortcuts for Selection
Indicators
You can use the following shortcuts for entering
values in the Edit Selection indicators:
• Press the Forward Slash (/) key to cycle through
the three Edit Selection indicators.
• Use Period (.) or the Left and Right Arrow keys
to move through the different time fields in each
Edit Selection indicator.
• Press the Up or Down Arrow keys to increase or
decrease numerical values.
• Move the mouse scroll wheel up or down to in-
crease or decrease numerical values.
• Drag in a field to scroll to a new value. For finer
resolution, Control-drag (Windows) or Com-
mand-drag (Mac).
• Press Control (Windows) or Command (Mac)
and Plus (+) or Minus (–), then type a number, to
add or subtract from the current field value. For
example, to add 10 to a current field value, press
Control (Windows) or Command (Mac) and
Plus (+) key, type “10,” and press Enter.
• Press Escape to exit the Edit Selection indicators
without entering any values.
Calculator Entry Mode
You can perform calculator-style editing of values
in the Edit Selection indicators.
To subtract time values:
1 In the Edit Selection indicator, highlight the
time field you want to change.
2 Press Minus (–) on the numeric keypad.
3 Type the amount you want to subtract from the
current time value, then press Enter.
4 Press Enter again to apply the change.
To add time values:
1 In the Edit Selection indicator, highlight the
time field you want to change.
2 Press Plus (+) on the numeric keypad.
3 Type the amount you want to add to the current
time value, then press Enter.
4 Press Enter again to apply the change.
Selecting Across Multiple
Tracks
To perform edits across multiple tracks or all
tracks, you must first select the tracks. Do this by
including other tracks in the selection, or by select-
ing in a Timebase ruler (for all tracks).
To make a selection in multiple tracks:
 With the Selector tool, drag vertically to include
adjacent tracks in a selection (drag horizontally
to define the time range).
To extend a selection to another track:
1 Using the Selector or Time Grabber tool, make
a selection in the first track or tracks.
2 Shift-click in additional tracks with the Selector
tool. An identical range is selected for each ad-
ditional track.
These shortcuts can also be used to enter start
and end values in the Transport window.