Specifications

Chapter 26: Making Selections 571
 If Link Timeline and Edit Selection is disabled,
drag the Edit Marker to change the selection
length.
To make a long-length selection:
1 With the Selector tool, click at where you want
the selection to start.
2 Scroll to the end point and Shift-click at the
point where you want the selection to end.
To verify the start and end points of a long selec-
tion, press the Left Arrow key to scroll to the be-
ginning of the selection, or press the Right Arrow
key to scroll to the end.
Nudging a Selection Range
The selection range (not the material within the se-
lection) can be moved by the Nudge value.
To nudge a selection range:
1 Configure the Nudge value. For details, see
“Defining the Nudge Value” on page 595.
2 Make the initial selection with the Selector tool.
3 While pressing Shift, press Plus (+) or
Minus (–) on the numeric keypad to move the
selection range by the Nudge value.
Nudging Selection Start/End
Points
Start and end points for selections can be moved by
nudging them.
To move a selection start or end point by the
Nudge value:
1 Configure the Nudge value. For details, see
“Defining the Nudge Value” on page 595.
2 Make the initial selection with the Selector tool.
3 Do one of the following:
• While pressing Alt+Shift (Windows) or
Option+Shift (Mac), press Plus (+) or Minus (–)
on the numeric keypad to move the selection’s
start point by the Nudge value.
• While pressing Control+Shift (Windows) or
Command+Shift (Mac), press Plus (+) or
Minus (–) on the numeric keypad to move the
selection’s end point by the Nudge value.
Edit Markers