Specifications

Chapter 9: Peripherals 147
Chapter 9: Peripherals
The settings in the Peripherals dialog define how
Pro Tools works with various audio,
synchronization and controller devices, as well as
with VENUE systems.
To configure settings for Pro Tools peripherals:
1 Choose Setup > Peripherals.
2 Click the tab for the type of peripheral you want
to configure.
3 Change the settings.
4 Click OK to save your changes and close the
Peripherals dialog.
Synchronization
The Synchronization page lets you configure
Pro Tools for use with MIDI Timecode and a syn-
chronization peripheral.
MTC Reader and Generator
The MIDI Timecode (MTC) settings let you select
the MIDI In and Out ports for MTC.
MTC Reader Port The MTC Reader Port setting
lets you select the MIDI In port to which the MTC
slave device is connected (the source of MTC in-
formation from the slave device).
MTC Generator Port The MTC Generator Port set-
ting lets you select the MIDI Out port to which the
master device is connected (this the destination of
MTC information from Pro Tools).
For information about synchronization
peripherals, see the SYNC HD Guide.