Specifications

Pro Tools Reference Guide92
I/O Setup Pages
The I/O Setup provides tabs to open pages for con-
figuring specific I/O Settings.
Opening an I/O Setup Page
To open an I/O Setup page:
 Click the corresponding tab at the top of the I/O
Setup.
Input Page
The Input page of the I/O Setup lets you create and
assign Pro Tools Input channels to receive audio
from the physical inputs of your audio hardware.
Configure input signal path names, formats, and
source channel (analog or digital) on the Input
page. Multichannel input paths (stereo or greater)
can have any number of sub-paths. Input channels
can have overlapping input paths. Input names,
channel widths, and physical input mappings are
saved with the system and the session, and can be
recalled from either.
Hold the Command key (Mac) or the
Control key (Windows) and use the Left or
Right Arrow keys to cycle through the
different pages of the I/O Setup.
It is recommended that if you choose to cus-
tomize your I/O Setup, configure the system-
specific options first: Input, Output, Insert,
Mic Preamps, and H/W Insert Delay. Then
configure the Bus page. Once you have con-
figured your system, you should not need to
change it unless you add or remove hardware
(such as audio interfaces) from your system.
See “Customizing I/O Settings” on page 100.
I/O Setup, Input page