Specifications

Chapter 6: System Setup 79
7 For S/PDIF compatibility with Tascam DA-30
DAT recorders, select the
Tascam option under
S/PDIF Format.
8 From the Input and Output channel pop-up
menus, select the physical ports (such as
Analog
1–2
or Optical 1–2), that will be routed to the
corresponding Pro Tools input and output chan-
nels (such as Ch 1–2, Ch 3–4), listed on the left
side of the Main page.
Inputs and outputs of similar format are differenti-
ated in the input and output channel pop-up menus.
For example, the AES/EBU inputs and outputs in
the HD I/O enclosure are listed as
AES/EBU [Encl],
while the AES/EBU inputs and outputs on the fac-
tory-installed Digital I/O card are listed (in pairs)
as
AES/EBU 1–2, AES/EBU 3–4, AES/EBU 5–6,
and AES/EBU 7–8. For HD I/Os equipped with a
second Digital I/O Card, the additional AES/EBU
I/O ports on the optional card are listed as
AES/EBU 9–10, AES/EBU 11–12, AES/EBU
13–14,
and AES/EBU 15–16.
9 Configure any specific controls for your audio
interface:
• “Configuring HD OMNI Controls” on page 79.
• “Configuring HD I/O Controls” on page 80.
• “Configuring HD MADI Controls” on page 81.
• “Configuring 192 I/O and 192 Digital I/O Con-
trols” on page 82.
• “Configuring 96 I/O Controls” on page 83.
• “Configuring 96i I/O Controls” on page 83.
10 For additional audio interfaces, select it in the
Peripherals list, and repeat the above steps.
Configuring HD OMNI Controls
To configure HD OMNI in Pro Tools:
1 Choose Setup > Hardware.
2 From the Peripherals list, select the HD OMNI
audio interface.
3 Click the Monitor tab and configure the options.
When working with HD OMNI, you should al-
ways configure the Monitor page first.
See your peripheral’s guide for additional
configuration details and restrictions. For
example, the Optical 1–8 channels (on the
192 I/O enclosure) will not be available at
session sample rates of 88.2 kHz or higher,
while the ports on the 192 I/O Digital I/O
card will still be available.
For detailed information about configuring
HD OMNI, see the HD OMNI Guide.
HD OMNI Hardware Setup, Monitor page