Specifications
What’s New in Pro Tools and Pro Tools HD 10.04
Increased Track Counts for
Pro Tools HD and Pro Tools
with Complete Production
Toolkit
Pro Tools HD and Pro Tools 10 with Complete
Production Toolkit provide the following in-
creased track counts:
• Increased possible number of voiceable au-
dio tracks to 768
• Increased possible number of Auxiliary In-
put tracks to 512
New Maximum Setting for
Automatic Delay
Compensation
Pro Tools HD and Pro Tools 10 software provide
increased Automatic Delay Compensation using
the new
Maximum setting. This setting allocates
the following numbers of samples for the Delay
Compensation Engine depending on the session
sample rate:
• 16,383 samples at 44.1/48 kHz
• 32,767 samples at 88.2/96 kHz
• 65,534 samples at 176.4/192 kHz
Low Latency Monitoring with
Core Audio and ASIO
Hardware
With Pro Tools and Pro Tools HD 10.0, you can
now use the
Low Latency Monitoring option to re-
cord with an extremely small amount of moni-
toring latency with Core Audio and ASIO audio
interfaces that have a built-in mixer (such as the
RME Fireface or the MOTU 828). Only tracks
with inputs set to an audio interface (not a bus)
use Low Latency Monitoring.
To use Low Latency Monitoring:
1 Assign each track output to either Output 1 or
Output 2 (mono), or Output 1–2 (stereo). Only
tracks assigned to these output paths can use
Low Latency Monitoring.
2 Record enable audio tracks by clicking their
Record Enable buttons.
3 Select Options > Low Latency Monitoring.
The Maximum option is not available with
Pro Tools|HD systems due to certain limita-
tions with TDM hardware.
If your Core Audio or ASIO hardware does
not have a built-in mixer, Low Latency
Monitoring does not function. If you do en-
able Low Latency Monitoring with such
hardware, monitoring will not available for
record-enabled tracks in Pro Tools.
Low Latency Monitoring is not available in
surround sessions with Pro Tools HD on
non-HD hardware (such as Core Audio and
ASIO devices).
On Mac, the Pro Tools Aggregate I/O does
not support the Low Latency Monitoring op-
tion.