Specifications

Appendix F: Digidesign WaveDriver (Windows Only) 101
16 If message appears which states “The file ‘di-
rectio.dll’ on Digidesign WaveDriver is needed.”
Browse to the location of the driver, select the
“directio.dll” file, and click OK.
The Digidesign WaveDriver Settings dialog will
automatically open.
17 Click on the Advanced button to open the
I/O Setup dialog. (See How to Change
WaveDriver Settings below for more informa-
tion about these dialogs.)
18 Click on the A: No Interface tab.
19 Select the Peripheral Type for the peripheral
you have connected to your d24 or Mix card.
20 Make any other desired settings in the I/O
Setup dialog.
21 Click OK to close the I/O Setup dialog.
22 Click OK to close the WaveDriver Settings di-
alog.
23 Restart Windows when prompted.
Removing the WaveDriver
To remove the WaveDriver:
1 From the Start menu, choose Settings > Con-
trol Panel.
2 Click the “Add/Remove Hardware” Icon.
3 Click Next.
4 Select “Uninstalled/Unplug a device” and
click Next.
5 Select “Uninstall a device” and click Next.
6 Select “Digidesign WaveDriver” from the list
and click Next.
7 Select “Yes, I want to uninstall this device”
and click Next.
8 Click Finish.
How to Change WaveDriver
Settings
To change settings for the WaveDriver:
1 From the Start menu, choose Settings > Con-
trol Panel.
2 Double-click the “System” icon.
3 Click the Hardware tab.
4 Click the Device Manager button.
5 Expand the “sound, video, and game control-
lers” section.
The WaveDriver may only be used with the
first peripheral connected to your mas-
ter/core card. If your d24 or Mix Core card is
connected to two peripherals using an op-
tional
Digidesign 16-channel peripheral ca-
ble adapter
, select the Peripheral Type for
the peripheral connected to “A.” If you have
multiple Pro Tools cards connected to mul-
tiple peripherals, select the Peripheral type
for the “A” peripheral connected to your
d24 or MIX Core card. Use the Identify
checkbox in the I/O Setup dialog to verify
which peripheral you are configuring for use
with the WaveDriver.
If you wish to return Pro Tools to its origi-
nal, pre-WaveDriver, state you must com-
pletely uninstall Pro Tools using the
“Add/Remove Software” control panel, then
reinstall Pro Tools. For detailed installation
instructions, see Chapter 2, “Windows
Configuration.”