User guide

Chapter 4: Pro Tools IO Control Software 16

System Setup

• Device Icon & ID Button - See the description in “Input Tab” on page 12.

• Sample Rate - This menu selects the sample rate. Under certain circumstances, (i.e., when a DAW session is open) this setting

will be overridden by software sample rate settings.

• Peak Hold - This menu sets the time that peak indications are held on software and front panel meters.

• Over Hold - This menu sets the time that over indications are held on software and front panel meters.

• Keyboard Volume Control - The

Audio Output menu sets the hardware output controlled by the computer keyboard volume

control.

Pro Tools IO Control Menu Bar

Pro Tools IO Control Panel Menu

• About Pro Tools IO Control - Choose this menu item to display version information.

• Preferences - Choose this menu item to display Pro Tools IO Controlʼs Preference panel. Check Launch Pro Tools IO Control

automatically when connecting a device to launch Pro Tools IO Control when the computer is started. Check Display Pop-ups

to show top panel encoder adjustments.

• Hide Pro Tools IO Control - Choose this menu item to hide the Pro Tools IO Control application.

• Hide Others - Choose this menu item to hide all other open applications.

• Show All - If any open applications have been hidden, choose this menu item to reveal all open applications.

• Quit Pro Tools IO Control - Choose this menu item to quit Pro Tools IO Control.

File Menu

• File>Rescan - Choose this menu item to re-initialize the link between Pro Tools IO Control software and the hardware connected

to the computer, in the case where the hardware is correctly connected and powered on but not detected in Pro Tools IO Control.

System setup

Pro Tools IO Control Menu Bar