User`s guide

Chapter 2: Installation and Setup
Pinnacle Systems DekoMOS User’s Guide 53
3. Click Configuration>Gateway Configuration. The Current Configuration window appears.
Information in the Device table at the top of this window is automatically configured.
4. Look at the Status column to confirm that all output channels are connected, as indicated by
the word Connected and a green background.
5. Look at the Allow Effects column to see if associated effects will play when a graphic airs. A
check indicates that associated effects will play. This display is for information only. The
setting is configured in the DekoMOS Gateway, as described starting on
page 43.
6. From the Control Room dropdown list, select a control room, then click set. This determines
the group of Dekos that this Playback Controller will drive, as defined in the DekoMOS
Gateway.
7. From the Styles dropdown, select a style, then click Set.