User`s guide

Chapter 2: Installation and Setup
34 Pinnacle Systems DekoMOS User’s Guide
• PBC Port default setting is 10544. Pinnacle Systems recommends keeping this setting.
6. In the Net HASP Connection Settings area:
• Enter the IP address of the computer with the Net HASP installed if it is not already entered. This
field automatically defaults to the address of the current machine.
• Keep the default setting of 475 for the Port number where the Net HASP will check for
connections unless you receive an error message.
7. Click OK.
Note: Using the Enabled Options button is described later in this chapter.
To configure the browser and editor settings:
1. Access the DekoMOS Gateway Configuration window if it is not already open. Select the
Browser/Editor tab.
2. In the Time Code area:
Click to check Use Time Code to enable clients to enter a time code when a graphic is
added to a story. Make a selection from the dropdown to specify the format of the time
code.
3. Default Graphic Duration allows graphics to play for the specified number of seconds from a
specified in time without entering a duration or an out time when you place graphics in a
rundown. You can override this setting later.
4. Click to choose the appropriate Frame Rate setting, NTSC or PAL for your facility.