User`s guide

Chapter 2: Installation and Setup
32 Pinnacle Systems DekoMOS User’s Guide
Suggestion: Create a folder in the Gateway machine for the DekoMOS Client Installer. To do this, name the
folder C:\Updates. Copy the latest DekoMOSClient.exe installer into the folder and share the folder as
Updates. The DekoMOS Client Installer field in the General tab would then read \\(Gateway
name)\Updates\DekoMOSClient.exe.
• Click the Auto-Update Password button to display a popup for entering the name, domain, and
password of a local administrative account. Enter the information. This information is encrypted in
auto-update files, allowing individual clients without administrative privileges to install auto-
updates. Click OK.
3. In the Log Settings area, enter settings as follows:
• For Log Detail Level, click the High radio button to show XML data in the Log of system activity.
Click Medium for normal log activity. Click Low to show errors only. This setting is
recommended unless you are troubleshooting.
• We recommend leaving Max Lines at the default setting.
• Click to check Display time in log lines (recommended) if you want the log to display the time,
according to the system clock, when activity occurs.
• Click to check or uncheck Hide Heartbeats. A heartbeat is a signal sent from one computer to
another, requesting a return signal to confirm their connection. If checked, you see only the results
of heartbeats you manually send, but not the ones the NCS initiates, or the ones the Gateway
automatically sends.
4. In the Startup Settings area, make these selections
• Click to check (recommended) or uncheck Start Minimized according to your preference.
• Click to check Automatically Start on Boot-Up (recommended) to start the Gateway whenever you
log on to this PC.
5. Click OK.