User`s guide

Chapter 2: Installation and Setup
28 Pinnacle Systems DekoMOS User’s Guide
Net HASP Dongle
The Net HASP dongle included with your DekoMOS system should be connected to the machine
where you will install the DekoMOS Gateway. Connect the dongle to either the parallel port or
one of the USB ports on the back of the machine. To connect a printer to this computer, connect it
with a cable to the dongle just as you would directly to the port. The Net HASP dongle enables the
DekoMOS Option for the NCS clients. For more about seeing what options are enabled and
enabling additional options, see page 47.
The Net HASP License Manager, the driver for the Net HASP, installs automatically with the
DekoMOS Gateway. Pinnacle Systems recommends selecting Service as the installation option
for the Net HASP License Manager. After installing, you should confirm that the Net HASP
License Manager is running and that it is configured to use TCP/IP.
To confirm that the NetHASP License Manager is running and properly configured:
1. Right-click the NetHASP License Manager Icon in the task tray at the bottom of your screen.
2. Click Show to see the Net HASP License Manager window. You should see the words Server
is listening to TCP/IP: Loaded and Net HASP License Manager is now - Active.
Components to Install
The DekoMOS Option requires installation of four software components:
• DekoMOS Gateway (on a designated PC)
Minimum system requirements are listed in Appendix A.
• DekoMOS Macro Server (on each playout Deko system)
• DekoMOS Playback Controller (on a designated PC)
Minimum system requirements are listed in Appendix A.