User`s guide

Chapter 2: Installation and Setup
24 Pinnacle Systems DekoMOS User’s Guide
To configure the iNEWS MOS Gateway and Server:
1. Follow these instructions to modify the mosconfig.xml file, from iNEWS, on the iNEWS
MOS Gateway. The proper settings for the <mosDevice> section of the mosconfig.xml file on
the MOS Gateway are included in the Add.To.INews.MosConfig.xml.rtf file on the
installation CD. Open this file in a program such as WordPad.
2. Replace the red placeholders with the proper values.
• MOS ID should be the name you provide when you install the DekoMOS Gateway.
• AMCP Name is the 8-character-or-less name used for communication between the iNEWS
Gateway machine and the iNEWS Server machine.
• Network Name of DekoMOS Gateway is the network name of the machine where the DekoMOS
Gateway will be installed.
Note that MOS ID and AMCP Name can be the same value.
3. Select all of the text after the beginning paragraph of instructions.
4. Use Copy and Paste to insert the specification into mosconfig.xml in the mosDevices section.
Before Installing on an ENPS NCS
You must be an ENPS Administrator to complete this process.