User`s guide

Appendix B: Connect Tally and GPI Control
Pinnacle Systems DekoMOS User’s Guide 167
7. Click OK and close all windows.
8. Restart the DekoMOS Playback Controller.
To configure the DekoMOS Playback Controller software for tally/GPI control:
1. From the DekoMOS Playback Controller Configuration menu, click Gateway Configuration
and select a Control Room as described on page 109.
2. From the Configuration menu, click User Preferences. Set Preview Channels, Rundown
Loading, Non-Tally Channels, and Smart Cursor preferences as described beginning on
page 120.
3. From the Configuration menu, click GPIs>Port Settings. In the GPI Set Up dialog, click to
check the Enable box for External GPI.
4. From the Configurations menu, click GPIs>Assignments. Assign commands to GPIs as
described beginning on
page 59.
To configure the switcher:
1. Configure switcher output GPIs according to the manufacturer's instructions
2. The recommended GPI pulse width setting is 4 fields.
3. Assign GPI triggers to switcher recalls or macros according to manufacturer's instructions.