User`s guide

Appendix B: Connect Tally and GPI Control
Pinnacle Systems DekoMOS User’s Guide 163
4. Connect a matrix output for each Deko video channel to a GPI input on the Burst GPI-10
Converter.
5. Connect switcher output GPIs to remaining inputs on the Burst GPI-10 Converter.
6. Connect the RS-232 output of the Burst GPI-10 Converter to COM-1 of the DekoMOS
Playback Controller.
Connection details for two control rooms, two 2-channel Dekos, two Burst GPI-10
Converters, and two DekoMOS Playback Controllers:
Note: Input, tally, and GPI numbers are shown for example only and do not imply that a specific connection
is necessary.
1. Use the hardware connection instructions on page 158 as a general guide for executing the
following steps.