User`s guide

162 Pinnacle Systems DekoMOS User’s Guide
Appendix B: Connect Tally and GPI Control
Connection details for a single control room, two 2-channel Dekos, one Burst GPI-10
Converter, and one DekoMOS Playback Controller:
Note: Input, tally, and GPI numbers are shown for example only and do not imply that a specific connection
is necessary.
1. Use the hardware connection instructions on page 158 as a general guide for executing the
following steps.
2. Connect video Outputs 1 and 2 from each Deko to switcher inputs, typically through a patch
field or router. Note that Deko Key Outputs 1 and 2, although not shown in the diagram, are
also connected to switcher inputs.
3. Connect switcher tally outputs, corresponding to video inputs from each Deko, to a tally
matrix and distributed to monitors, Under Monitor Displays and other appropriate devices.