User`s guide

160 Pinnacle Systems DekoMOS User’s Guide
Appendix B: Connect Tally and GPI Control
3. Connect switcher tally outputs, corresponding to Deko Video Inputs 1 and 2, to a tally matrix
and distribute to monitors, Under Monitor Displays, and other appropriate devices.
4. Connect a matrix output for each Deko video channel to a GPI input on the Burst GPI-10
Converter.
5. Connect switcher output GPIs to remaining inputs on the Burst GPI-10 Converter.
6. Connect the RS-232 output of the Burst GPI-10 Converter to COM-1 of the DekoMOS
Playback Controller.
Connection details for two control rooms, one 2-channel Deko, two Burst GPI-10
Converters, and two DekoMOS Playback Controllers:
Note: Input, tally, and GPI numbers are shown for example only and do not imply that a specific connection
is necessary.