User`s guide

Appendix B: Connect Tally and GPI Control
Pinnacle Systems DekoMOS User’s Guide 159
•two control rooms and two 2-channel Dekos
Other configurations are also possible, and you may want to interpolate from these examples to
suit your specific needs.
Connection details for a single control room, one 2-channel Deko, one Burst GPI-10
Converter, and one DekoMOS Playback Controller:
Note: Input, tally, and GPI numbers are shown for example only and do not imply that a specific connection
is necessary.
1. Use the hardware connection instructions on page 158 as a general guide for executing the
following steps.
2. Connect Deko Video Outputs 1 and 2 to switcher inputs, typically through a patch field or
router. Note that Deko Key Outputs 1 and 2, although not shown in the diagram below, are
also connected to switcher inputs.