User`s guide

Chapter 5: Controlling Playback
Pinnacle Systems DekoMOS User’s Guide 139
To clear a clip:
Do one of these:
• Click the Clear Clip button for the appropriate channel.
• Click Current Item>Clear Clip.
• Right-click the Channel Mini Preview. From the popup menu that appears, click Clear Clip.
To stop an effect:
Do one of these:
• Click the Stop Effect button for the appropriate channel.
• Click Current Item>Effect Cancel.
• Right-click the Channel Mini Preview. From the popup menu that appears, click Effect Cancel.
To resume an effect:
Do one of these:
• Click the Resume Effect button for the appropriate channel.
• Click Current Item>Effect Resume.
• Right-click the Channel Mini Preview. From the popup menu that appears, click Effect Resume.
• Press Enter.
• Press the Spacebar.
To place a channel under external control or remove a channel from external control:
Click the Tally Control button.
If a channel is under external control, the channel name is highlighted.
Note: You must place a channel under external control with the Tally Control button whether the external
control is from a tally signal or a manually controlled GPI.
Tally control
on
Tally control
off