Specifications

Chapter 5
80
The Services dialog box will appear.
4. Select the MOSConfigService.
5. Select Action > Stop.
This will stop all MOS Gateway services in the proper order.
6. Restart the services by selecting the MOSAdminService, then select
Action > Start.
This will start all MOS Gateway services in the proper order.
7. Click Close.
Configuration File Components Explained
In this section, lines of the MOS Gateway configuration file are shown in
groups; each group of lines is a section of the file that can or should be
modified to configure the MOS Gateway to work with MOS devices at
your site. The section pertaining to replication with a newsroom computer
system is located between lines with <ncs> and </ncs>. The section
pertaining to devices is located between lines with <listDevices> and
</listDevices>. Each group describing a particular MOS device is
located between lines with <mosDevice> and </mosDevice>. The
information that should be modified appears in bold. An explanation of
how to modify the information follows each group.
n
If only one MOS device is used, all other <mosDevice> groups should
be removed. This helps reduce the MOS Gateway’s workload.