Specifications

Configuring iNEWS Servers
61
Address/Stack Specify a range of addresses in this field. The
monitor server uses this range to store the forms it
builds. To specify a range of addresses, enter the
starting address, followed by a space and the ending
address. For instance, to reserve addresses 1 through
199, type 1 199 in this field.
The range of numbers must be large enough to hold
all character-generated graphics—also known as
supers—that monitor server is likely to build for the
show. Also, ensure you do not select a range that
conflicts with the addresses the character generator
uses to store its permanent supers or CG forms.
Parameters for Still Stores:
Drive Select the disk drive you want the machine to use. If
you leave this field empty, the machine uses its
default drive.
Directory/User# If your still store machine has user numbers, use this
field to specify the user number you want to use for
that show.
Address/Stack Specify the stack you want the still store to use in
this field.
Parameters for Video Machines:
Channel Assignment This parameter specifies whether the iNEWS system,
the ControlAir Workstation, the device manager, or
the video (cart) device assigns channels. Use these
codes:
0 to have channels assigned by device
1 to have channel assigned by iNEWS
2 to have channels assigned by device manager
3 to have channels assigned by ControlAir
Workstation
Table 3 Device List Line Parameters (Continued)
Parameter Definition