Specifications

Chapter 3: Configuration and Connection 5
Chapter 3: Configuration and Connection
Standard Configuration
Elco crimp pins and hoods for inputs are supplied in accessory cable kits. Input cabling is not included.
Cable Specifications
The standard lengths specified in the table above are supplied so the mic-line interface can be located in the control room. Cable
kits are ordered separately. Custom lengths are available.
ML530 standard cable diagram
4
21
B
recommended locations
3
AM713
ADigital Core
B
Use relative locations to
determine cable lengths
4
ML530
Control Room
B
Machine Room
A
5,6
1 2
44
Cable Qty Description 10M Part # 20M Part# Length
Accessory cable kits by special order 936-07083-01 936-07155-01
11MADI Output: RG59 75  coax 032-07230-00 032-07306-00
21AES/EBU Sync:
one male XLR <> one female XLR
030-07085-01 030-07153-01
3 1 TCC Control from 253i Interface Pilot 030-06983-01 030-06985-01
4 2 ML530 Analog Out
one Elco 38 <> twelve male XLR
030-7108-01
.5 m
5 2 Elco 38-Pin Connector w/hood
100-02099-00
NA
6 80 Elco Crimp Pins
100-02100-00
NA