Specifications

ML530 Guide4
Back Panel
Inputs (38-pin Elco) 24 inputs are provided on two 38-pin Elco
connectors. The level of all signals input at these ports can be
boosted or attenuated. In standard configuration, the input
cable is configured by the customer. Elco connectors and pins
are provided.
Outputs (38-pin Elco) 24 outputs are provided on two 38-pin
Elco connectors. The supplied output cables fan out to two
sets of 12 male XLRs for connection to the AM713 Analog to
MADI converter.
Control (DB-15) Input for digital control signal from PC253i
Digital Pilot. Signal format is Euphonix TCC bi-directional se-
rial protocol. All switching and gain controls are communi-
cated via this connector.
AC Line In (IEC) and Fuse Tray The power connector accepts
standard IEC power cords. 90–250 VAC 110, 220, or 240 VAC,
50/60 Hz can be applied at this connector.
ML530 front panel
CONTROL
OUTPUTS INPUTS
1-12
13-24
ML530