Specifications

Chapter 3: Configuration and Connection 7
Optional Input Patch
The optional input patchbay has the capacity to provide input patching to 48 channels or two ML530 interfaces. An additional
set of cable D (below) is required for the second ML530 interface. Patchbay, cables, and pins are ordered separately.
Cable Specifications
* Elco hoods and crimp pins are included in standard 10m and 20m accessory cable kits.
** 10m cable available, one male Elco 38 <> one male Elco 38, part #030-6913-01.
Input Patch cable diagram
5 5
4
21
B
recommended locations
3
AM713
ADigital Core
B
Mic-Line Input Patch
4
ML530
Note: The optional input patchbay ha
capacity to provide input patching to
channels or two ML530 Interfaces. A
additional set of cable D is required f
second ML530 interface.
DD
A
B, C
Part Qty Description Part # Length
A 1 Tie Line Patch 950-03770-01 NA
B* 2 Elco 38-Pin Connector w/hood 100-02099-00 NA
C* 80 Elco Crimp Pins 100-02100-00 NA
D** 2 ML530 Analog Out
one male Elco 38 <> one male Elco 38
030-07158-01 2 m