User`s guide

14
Configuring an FTP Server Profile for Ingest From
a K2 Server
When adding a K2 server to your workgroup environment, you need to create an FTP server
profile for the K2 server’s FTP parameters. This section describes the ingest setup.
n
After you create a profile of the FTP parameters for the FTP server, you cannot edit the
Profile Name, Default Directory, or FTP Mode settings. If you need to change these settings,
you need to create a new profile for the FTP server.
To create a K2 server profile for ingesting media:
1. On your Interplay Transfer server, click the Start button, and select All Programs >
Avid > Avid Interplay Transfer Engine Configuration.
The Avid Interplay Transfer Engine Configuration dialog box opens.
2. Click the Configure FTP Parameters button.
The FTP Configure dialog box opens.
n
If the Configure FTP Parameters button is not available, “Interplay Transfer Engine with
Supplemental FTP Services” was not selected as the installation type when the Interplay
Transfer Engine application was installed. You need to reinstall the Avid Interplay Transfer
Engine software.