Specifications

Chapter 2: Software Configuration 5
chapter 2
Software Configuration
Before you proceed, make sure you have completed the following:
• Installed Pro Tools or Pro Tools HD version 9.0 or higher
• Installed the latest EuControl software and attached your Artist Series hardware
Enabling EUCON in Pro Tools
To enable EUCON control in Pro Tools:
1 Make sure EuControl software is running. Your desktop should have a green EUCON icon in the up-
per right corner.
If this icon is not lit, make sure your controllers are powered on and attached. If the icon remains un-
lit, see the installation instructions that came with your Artist Series hardware.
2 Launch Pro Tools.
3 Choose Setup > Peripherals, and click to go to the Ethernet Controllers tab.
4 Click to select Enable EUCON.
EUCON icon
Enabling EUCON in Peripherals > Ethernet Controllers