Specifications

Chapter 6: Plug-ins and Sends 39
8 When the desired output or bus is displayed, press the Soft Encoder for the desired choice. A green
dot appears indicating that send bus is now assigned to the currently selected tracks.
Opening and Editing Sends on MC Control
To access and edit a send on MC Control:
1 Select a track with send already assigned.
2 Press the SENDS Soft Encoder. The Soft Encoders show assigned sends, and empty slots (a–e, or f–j).
Once in Aux mode, do any of the following to adjust send parameters:
To adjust send level:
 Rotate the encoder for the desired send.
To adjust send pan:
1 Press the encoder for the send you want to adjust.
2 Rotate the Soft Knob for L Pan and/or R Pan.
To mute a send:
 Touch its Soft Encoder in the Touchscreen display (such as Bus 1). Touch again to unmute.
To toggle the send pre- or post-fader:
 Hold SHIFT and touch the Soft Encoder for the send in the Touchscreen (such as Bus 1).
Making Sends Inactive/Active on MC Control
To toggle a send between active and inactive:
1 Bank to and select the desired track.
2 Press the SENDS encoder.
3 Navigate the Touchscreen until the desired send is displayed.
4 Press both SHIFT keys simultaneously to enable Shift Lock mode (both key LEDs stay lit).
5 Hold Command+Control (Mac) and touch the Send name in the Touchscreen.
To assign the send to all selected tracks, hold Shift+Option (Mac) and press the encoder. To assign the
send on all tracks, hold Option (Mac).
To toggle all sends in that same slot (a–j) on all selected tracks, hold Shift+Option (Mac) at the same
time. To toggle all sends in that slot on all tracks, hold Option (Mac).