Specifications

Artist Series and Pro Tools38
Working with Sends
This section shows how you can assign and adjust Pro Tools sends.
Working with Sends on MC Control
Assigning Sends
To assign sends on MC Control:
1 Select one or more tracks.
2 Press the SENDS Soft Encoder. The first five Soft Encoders show slots a–e, including any sends al-
ready assigned in that slot.
3 If desired, press the lit PAGE > key to go to sends f–j.
4 Press both PAGE keys (< PAGE and PAGE >) simultaneously to enter Send Assign mode.
5 Press the encoder for the send slot (a–j) you want to assign. The first three Soft Encoders show the
next choices for Send assignment.
6 Press a Soft Encoder to choose one of the following:
no send Assigns no send bus to the selected track(s).
output Displays available output busses in the Soft Encoders.
bus Displays available internal busses in the Soft Encoders.
7 To see additional choices, press the lit < PAGE or PAGE > key.
Artist Series hardware and documentation use the term “AUX” for the Pro Tools term “sends.” Do not
confuse references to “AUX” with Pro Tools Auxiliary Input tracks.
Soft Encoder for Sends
SOFT KEYS
HOME
END