Specifications

Artist Series and Pro Tools30
4 Press an Edit Tool Soft Key again to select the next option for that tool (for example, pressing Trim
repeatedly cycles through all available Trim tool options).
To change Edit Modes using an MC Control:
1 Press SHIFT+SOFTKEYS/HOME to return the Soft Keys to their first (home) page.
2 Press the SOFT KEYS V (down) key once to navigate the Soft Keys to the second page. The Soft Keys
display now shows Edit Modes in the lower row.
3 Press the Soft Key for the desired Edit Mode (Shuffle, Slip, Spot, or Grid).
To toggle between Absolute and Relative Grid mode:
 Press the Grid Soft Key again. In Pro Tools, the Edit Mode display shows Rel Grid when that mode is
enabled.
Using the Jog/Shuttle Wheel
The Jog wheel and Shuttle ring on many controllers (such as MC Transport) perform a variety of func-
tions, from basic Jog and Shuttle to zooming, adjusting track height, and moving selections.
To use the Jog wheel to jog and shuttle:
1 Enable Jog mode by pressing the JOG key (if available) or the Soft Key assigned to Jog.
2 Rotate the Jog wheel to jog back or forward.
3 To enable Shuttle mode, press the SHUTTLE key or the equivalent Soft Key, if available.
To zoom horizontally:
1 Press the ZOOM HORIZONTAL key, or assign a key to Zoom Horizontal using EuControl software.
2 Spin the Jog wheel to the left to zoom out horizontally (show more session time), or to the right to
zoom in.
To adjust track height:
1 Press the ZOOM VERTICAL key (on MC Control, press SHIFT + ZOOM HORIZ), or assign a key to it us-
ing EuControl software.
2 Spin the Jog wheel to the left to zoom out (reduce track height), or to the right to zoom in and in-
crease track height.
If repeated pressing does not cycle through tool options, check the status of the Pro Tools Options menu
command Edit/Tool Mode Keyboard Lock. For more information, see the Pro Tools Reference Guide.