Specifications

Chapter 3: Track and Session Basics 25
Working with Track Groups on MC Mix
To enable or suspend a track Group using MC Mix:
1 Press SHIFT+AUX/GROUP. The display shows <All> in every fader display (or, the letter designation
of the last edited group).
2 Press the lit PAGE > keys to show other available Groups across the display. As you navigate to other
Groups, the encoder SEL keys (in the encoder row) light to indicate an active (enabled) Group. In ad-
dition, track ON keys light to indicate track membership in the currently displayed Group.
3 To suspend a Group, press any lit (encoder) SEL key.
4 To enable a Group, press any unlit (encoder) SEL key so that it stays lit.
To add or remove tracks from a Group using MC Mix:
1 Press SHIFT+AUX/GROUP. The display shows <All> above each encoder (or the letter designation of
the last edited group). All tracks are members of the <All> group by default.
2 Press the lit PAGE > keys to show other available Groups across the display. As you navigate to other
Groups, track ON keys light to indicate track membership in the currently displayed Group.
3 To add a track to the currently displayed Group, press the encoder in the desired track (below the
displayed Group name). The track ON key lights green showing that track is now a member of the
Group.
4 To remove a track from a Group, press the encoder again so that the ON key in that track is unlit.