Specifications

Chapter 3: Track and Session Basics 23
To assign track output on MC Mix:
1 Select a channel by pressing its SEL key.
2 Press SHIFT+ the PAN/MIX key. The display shows the output assignment for each banked track.
3 Press the encoder for the track you want to assign.
4 Press the encoder below the desired output assignment:
• If you select no output, the assignment is made and that encoder ON key lights.
• If you select output or bus, Output bus and internal bus choices are listed above each Soft En-
coder. Press the <PAGE and/or PAGE > keys to navigate to other output choices.
5 When the desired output is displayed, press its Soft Encoder. That encoder ON key lights.
6 To exit output assign mode, press any other Knob Set selector (such as PAN).
Multiple Output Path Assignments
Pro Tools tracks can have multiple output paths assigned to them. When assigning track output from
a EUCON unit, you can simply repeat the previous instructions and the new assignment will be added
to the current assignments. When reassigning outputs, you must first assign no output, then assign the
new output path.
To reassign track output on MC Mix:
1 Select a channel by pressing its SEL key.
2 Press SHIFT+ the PAN/MIX key. The display shows the output assignment for each banked track.
3 Press the encoder for the track you want to assign.
4 Press the encoder for no output (encoder 1). The assignment is made and that encoder ON key lights.
5 To exit output assign mode, press any other Knob Set selector (such as PAN).
6 Repeat these steps and assign the new output path.
Display no output output bus
Soft Encoder 1 2 3