Specifications

Artist Series and Pro Tools22
To reassign track output without adding additional output assignments on MC Control:
1 Select a channel by pressing its SEL key.
2 In the Soft Encoders, press the Mix encoder. The Touchscreen shows the output assignment for the
currently selected track.
3 Press Soft Encoder 1 (the one showing the current assignment, if any). The first three Soft Encoders
now display the next level of choices for output assignment.
4 Press Soft Encoder 1 to select no output.
5 Press BACK (each press returns you up one level), or press SHIFT + BACK/TOP to jump back to the
top view.
6 Repeat these steps and choose a new output path.
Routing Track Input and Output on MC Mix
These examples show how to route track input and output from MC Mix.
To assign track input on MC Mix:
1 Select a channel by pressing its SEL key.
2 Press SHIFT+ the INSERTS/INPUT key. The display shows input assignments for banked tracks.
3 Press the Encoder for the track you want to assign. The first three Soft Encoders show the next
choices for input assignment.
4 Press the Soft Encoder below the desired input choice:
• If you select no input, that encoder ON key lights.
•If you select interface or bus, available hardware inputs or internal busses are listed above the Soft
Encoders. Press the < PAGE and/or PAGE > keys to navigate to other input choices.
5 When the desired input source is displayed, press its Soft Encoder. The encoder ON key lights.
6 To exit output assign mode, press PAN.
Display no input interface bus
Soft Encoder 1 2 3