Specifications

Chapter 3: Track and Session Basics 21
To assign track output on MC Control:
1 Select a channel by pressing its SEL key.
2 In the Soft Encoders, press the Mix encoder. The Touchscreen shows the output assignment for the
currently selected track.
3 Press Soft Encoder 1 (the one showing the current assignment, if any). The first three Soft Encoders
now display the next level of choices for output assignment.
4 Press Soft Encoder 1, 2, or 3 to select the following as desired:
no output (encoder 1) Assigns no output to the track (the track will be silent).
hardware (encoder 2) Displays Output bus choices (such as Out 1–2) in the Soft Encoders.
bus (encoder 3) Displays internal bus choices in the Soft Encoders.
5 To see additional choices, press the lit < PAGE or PAGE > key.
6 When the desired output choice is displayed, press its Soft Encoder. A green LED lights next to the
Soft Encoder, indicating assignment on the currently selected track(s).
7 To exit Output Assign mode, press BACK (each press returns you up one level), or press SHIFT +
BACK/TOP to jump back to the top view.
Multiple Output Path Assignments
Pro Tools tracks can have multiple output paths assigned to them. When assigning track output from
a EUCON unit, you can simply repeat the previous instructions and the new assignment will be added
to the current assignments. When reassigning outputs, you must first assign no output, then assign the
new output path.
Soft Encoder for Mix
SOFT KEYS
HOME
END