Specifications

Chapter 3: Track and Session Basics 11
Customizing Controls in EuControl
EuControl software makes it very simple to remap any control to Pro Tools commands and options.
Here is a quick example of how to reconfigure one of the Transport keys on MC Transport to toggle
Dynamic Transport mode on/off. It shows the steps required to re-assign a single key.
To re-assign a Soft Key on MC Transport for Pro Tools:
1 Launch Pro Tools.
2 Press the SHOW key. The EuControl Settings window opens.
3 Click to go to the Soft Keys tab. The currently assigned Soft Keys are shown.
Soft Keys tab in EuControl Settings (MC Transport shown)
If the EuControl Settings window doesn’t look the same as the picture above, check the current setting
of the Section menu located in the upper left of the EuControl Settings window. If necessary, click it
and choose
Softkeys.