Setup guide

EUCON Application Setup Guide54
Your Artist media controller should now be controlling Pro Tools. If not, try the following:
 Make sure Pro Tools is the front-most application (receiving keystrokes and mouse clicks). The Artist media controllers control
only the front-most application.
 Check that all steps in “Setting up EUCON to Control Pro Tools” on page 51 and in this section have been performed correctly,
and reboot your computer.
Tips and Shortcuts
Assign and Control Plug-ins
Placing plug-ins on a track and controlling them from the Artist Series media controller can speed up your workflow. Controlling
a plug-in with knobs instead of a mouse not only provides more intuitive, higher resolution control, but can also control multiple
parameters simultaneously. You can dial in settings or automate plug-in control without mousing around or drawing lines in the ar-
range window.
To assign and control plug-ins:
1 Select a track on the Artist media controller.
2 Press the INSERTS key (Artist Mix) or the INSERTS Knob Top (Artist Control).
3 Press both PAGE keys simultaneously to enter Config mode.
4 Push the Knob Top beside the Insert you wish to assign the plug-in to.
5 Push the type for the type of plug-in you wish to instantiate.
6 Press the Knob Top to select the actual plug-in.
7 Press the Knob Top to select the channel format.
8 Press both PAGE keys simultaneously to exit Config mode.
9 Push the Knob Top to open the plug-in.
10 Control plug-in parameters; press the PAGE keys to access more.
11 Press the BACK key to close plug-in.
Wheel Edit Modes (Artist Control)
Use the Jog Wheel to trim the head/tail of a region, move a region, or slip audio in a region without clicking and dragging with the
mouse.
To use the jog wheel:
1 Select a track on the Artist media controller.
2 Select a Region on the track.
3 Touch the Softkeys button on the Touchscreen to display Softkey view.
4 Press Editing on the Touchscreen.
5 Zoom into the region.
6 Touch Region on the Touchscreen to trim head and tail with Jog Wheel.
7 Adjust nudge value with Nudge + and Nudge – on the Touchscreen.