User guide

MC Transport User Guide30
Surfaces
The Surfaces tab shows all Artist media controllers on your network and those connected to your instance of EuControl.
The feature Control Unit banks independently is available for MC Control only.
All Surfaces
All Surfaces shows all Artist Series controllers on the network. A device shown in light gray is already connected either to your
own or another instance of EuControl running on a different workstation. In both cases, it is not selectable.
My Surfaces
My Surfaces shows the Artist Series controllers connected to your instance of EuControl. There can be one MC Control, one
MC Transport, and up to four MC Mixes in the My Surfaces list, linked into a single large surface.
The top-to-bottom order corresponds to the left-to-right order of the surfaces, respectively. The leftmost surface has fader strip 1.
Use the up and down buttons to reorder the list.
Each Artist media controller can be renamed by double-clicking the existing name and typing a new name.
Add
Click Add to add the selected All Surfaces entry to My Surfaces. This connects this Artist media controller to your instance of
EuControl. You can also click and drag an Artist media controller from All Surfaces to My Surfaces.
Add is disabled if all Artist media controllers in All Surfaces are connected to any instance of EuControl.
Remove
Click Remove to remove the selected surface from My Surfaces and make it available to other instances of EuControl.
Remove is disabled if no surface is selected.
Surfaces tab