User guide

MC Transport User Guide8
10 Press and release the POWER switch on MC Transport. Do the following, as appropriate for your operating system:
Mac Wait up to 60 seconds. A green icon in the menu bar indicates correct installation.
Windows Wait up to 60 seconds. A green icon appears in the System tray (or, in Hidden Icons if your system is not configured to
show all icons in the System tray).
11 If the green icon does not appear, do any of the following:
• Shut down MC Transport and the computer and wait 10 seconds, then turn on your router/switch (if any) and then your
computer and wait until it finishes starting up. Then turn on MC Transport.
• If you are using a pre-2002 Mac and you are using an Ethernet router or switch, you need to purchase a standard
straight-through Ethernet cable (instead of the crossover Ethernet cable supplied) from a computer store.
• Refer to www.avid.com/artistsupport for the most current troubleshooting information.
12 Launch your application (such as Pro Tools) and open a session.
13 Set up your application to work with the MC Transport according to the instructions in the EUCON Application Setup Guide.
Updating Firmware
If you downloaded the latest EuControl software from the web, you may need to update the firmware on your Artist Series con-
trollers.
1 Click the green icon in the menu bar and select EuControl Settings (Mac), or double-click the green icon in the System tray or
Hidden Icons (Windows).
2 Select the Surfaces tab in EuControl.
3 Select each Artist Series media controller in the My Surfaces list (Shift-click to select multiple devices).
EUCON icon on Mac
EUCON icon on Windows