User guide

Chapter 11: DAW Integration 93
MCS Panner
The JLCooper MCS Panner is supported with the Joystick MC. You must first download and install the
SurroundPanner_31327.dmg from the Avid website to configure the Surround Panner to use with Pro Tools and the Joystick MC.
To configure the Surround Panner:
1 Launch Pro Tools.
2 Choose Peripherals > MIDI Controllers.
3 Assuming you have four HUIs configured, re-assign controller #4 to SurroundPnr in the Type field.
4 Set Receive From and Send To to the appropriate EUCON port, as defined in EuPrefs Pane. If you have a previous HUI assign-
ment, first select None, then re-assign to a EuMIDI port.
5 Click OK.
6 Press Soft Key Bank 6 on the MC and you will see the controls for the Surround Panner assigned in the Pro Tools Appset (pre-in-
stalled with the MC from the factory).
7 You must use the JL Cooper Surround Panner Previous/Next and Up/Down functions, which are assigned to Soft Keys, to move
the Surround Panner from track to track and from Channel Pan to Aux Pan, respectively.
8 If Soft Key Bank 6 has no Surround Panner assignments, you may assign them from the EUCON/HUI Processor by adding a
EUCON command in Soft Key Setup and selecting Prev/Next, Up/Down and other MCSPanner functions. Please refer to the
JL Cooper MCS Panner user guide (www.jlcooper.com) for complete instructions.
Pro Tools Surround Panner selection