User guide

MC Pro User Guide78
EUCON Adapter Preferences
This section describes EUCON Adapter Preferences for track assignment and transport control.
Dynamic Selection of EUCONized Tracks
A list of checkboxes determines which channel types are modeled in EUCON. If a certain channel is available in Nuendo and the
corresponding checkbox is checked, the channel can be accessed through EUCON and is deemed EUCON-ized.
All channels except Input channels are EUCON-ized by default and appear on the MC/S5MC surface. Navigate to Nuendo >
Devices Menu > Device List > EUCON to choose which types of tracks are EUCON-ized and displayed on the surface. This is useful
to eliminate tracks from the surface, reduce memory usage, and reduce the time needed to build the EUCON mixer model when
connecting, adding, or removing tracks from the Nuendo project.
To enable/disable EUCON-ized tracks:
1 Navigate to Nuendo > Devices Menu > Device List > EUCON. Checkboxes appear next to each type of Nuendo track.
2 Select the types of tracks to map onto the surface by selecting the checkbox next to each type. Tracks without a checkmark do
not appear on the surface. This setting applies only to the open project.
Nuendo Transport Preferences
Two Nuendo transport control modes are available for the MC. Toggle the modes from the Tape machine style transport option
in the Transport behavior section of the EUCON module. The two transport modes affect the operation of the Stop, Fast Forward
and Rewind buttons in the following manner:
Tape Machine Style Transport Not Checked
Stop The MC Stop button copies the Nuendo stop button.
Fast Forward/Rewind The FF/RW buttons function as EUCON Momentary/Latch-Switches. If the button is pressed and released
quickly, the switches behave momentarily, resembling the way these buttons work in Nuendo. If the FF/RW buttons are held
down longer than the latch time set in the Preferences-Setup page, they latch.
Tape Machine Style Transport Checked
Stop The MC Stop button halts the transport and keeps the play head at the current position (even multiple presses), independent
from Nuendo preferences.
Fast Forward/Rewind The FF/RW buttons always latch independent of the MC Latch Time preference. Repeatedly pressing the
same FF/RW button has no effect. The current action can be stopped by pressing the opposite wind button, stop, or play. The
FF/RW also stops if it reaches the beginning or end of the project.
Nuendo EUCON Preferences