User guide

Chapter 11: DAW Integration 77
Multiple Track Selection
Multiple track selection from the surface depends on the Track Selection mode preference found on the General Preferences page.
Track Selection mode can be set to Intercancel or Sum.
Intercancel Multiple track selection from the surface is not possible.
Sum Multiple track selection is accomplished by pressing Chan Select either from the MC Touchscreen or on the channel strips.
De-select a selected track by pressing Chan Select again.
MIDI Tracks
Nuendo MIDI tracks are supported on the surface. The Insert, Dyn, Pan, Insert, and Mix Knobsets can be used with Nuendo MIDI
tracks.
The Insert Knobset has only four insert slots (audio channels have eight). Insert MIDI plug-ins can be modified and automated
in the Insert Knobset on MIDI tracks. Bypass has no effect on MIDI inserts.
The Pan Knobset allows stereo-only panning of MIDI devices. On a joystick MC, the joystick controls stereo-only panning on the
attentioned MIDI track.
The Dyn Knobset selection opens the first Compress MIDI plug-in when loaded into one of the insert slots (inserting MIDI
plug-ins is only possible with the trackball at this time). Knobs in the Dyn Knobset allow modification and automation of
parameters of Nuendo Compress plug-ins.
VSTi Tracks
VSTi tracks have only slightly different features than audio channels. The Record and Monitor buttons are disabled, Inserting of
VSTi’s is only possible with the trackball, and the Input Knobset is non-functional. Otherwise, VSTi tracks function identically to
audio channels.
Solo Preferences Touchscreen