User guide

Chapter 11: DAW Integration 75
MC Control Room and Monitor Setup
Press the Control Room Setup button on the MC to open the Control Room Setup Touchscreen. There are three tabs:
Source Selects what the Control Room section monitors. The Mix bus, the default bus in Nuendo’s VST Devices Output tab (or-
ange speaker icon next to its name) is always available. If Studio or External Input busses have been created, they also appear.
Speakers Allows soloing or muting of one or more speakers. Touch the speakers in the Speaker list to turn them on. They change
to yellow to show that they are active. The Left-Right option is a shortcut for a stereo feed: it automatically solos the Left and
Right speakers. Touch the ON button to the left to turn on/off all solo assignments.
Talkback If a Talkback bus was created in Nuendo’s VST Devices Studio tab, pressing the MC’s Talkback button enables the talk-
back function in the Nuendo Control Room Mixer. The Talkback Mic Level adjustments on the Touchscreen do not function
with Nuendo’s Control Room Mixer at this time.
MC Control Room Setup Touchscreen
Due to Nuendo’s internal mixing structure, only one external input can be monitored at a time. Regardless of how many of the six
External Input busses are used in the VST Connections > Studio tab, there will be only one Ext. selection on the MC Touchscreen.
To switch between External Inputs, use Nuendo’s Control Room Overview (Devices menu) and click on the available External
Input crosspoint boxes.
The Insert Disabled and Control Room Variable controls shown on this tab are not enabled for use with Nuendo’s Control Room
Mixer at this time.
Talkback tab in Control Room Setup Touchscreen