User guide

MC Pro User Guide64
Phase Select this checkbox to reverse the phase of the left channel (no surface control for this parameter)
Only sections created in the Sources tab appear in the Source boxes. To route a Source to a specific Monitor section, select it in
the Source box for the desired monitor output. Sources can also be selected from the MC Monitors section Setup Touchscreen.
When the workstation and MC are connected, the changes made in this tab are reflected in the Monitor and Control Room
section on the surface, and vice versa.
Sources
The Sources tab creates sources to SME’s mixer inputs. To create a source, select the Format (Mono, Stereo, or 5.1), select the Start
Channel, type a name into the Name field, and click the Create button. SME creates the input monitoring section and adds it to
the list of sections on the Main tab; it is now available for monitoring. Channels 1–6 are used for internal busses from the appli-
cation using the Studio Monitor Core Audio driver. Channels 9–16 are reserved for external inputs, physical inputs to the audio
I/O (i.e. an external CD player connected to the sound card inputs).
To route stereo audio from an application running on the Mac into SME, select Euphonix Monitor as the application’s Core Audio
output driver. In the SME Sources tab, create a stereo source, name it (Logic, Nuendo, etc.), and set the start channel to 1. This
creates a stereo monitoring source for SME mixer input channels 1 and 2. Enable the source in SME Main tab or from the MC
Monitors section setup Touchscreen.
To create a source for a stereo external input (such as a CD Player):
1 Select Stereo as the Format.
2 Select 9 as the Start Channel.
3 Type CD Player in the Name field.
4 Press the Create button. This creates a stereo source for SME mixer external input channels 9 and 10. The inputs to that source
are defined in the Patch tab.
Sources Tab