User guide

Chapter 8: Monitors and Control Room 55
Monitors
The Monitors section of the MC surface can control up to two monitor outputs per page, labeled Monitor A and B in SME. Audio
sources for Monitor A and B are configured in SME’s Main tab or the MC’s Touchscreen.
Touch-sensitive Knobs These knobs control the level (displayed in the LED display to the right of the knob) of their respective
monitor outputs.
Up/Down Arrow Buttons These buttons switch the knobs from controlling the first two outputs to controlling the second two out-
puts.
Setup This key opens the Monitor Setup Touchscreen. Toggle selected Monitor A and B audio source(s) from the list displayed on
the Touchscreen.
The top-right unmarked key is currently not implemented.
Clear and All Keys
The Clear Solo key turns off the solo on all DAW tracks even if several solo modes are supported (i.e., AFL, PFL, SIP).
The Clear Mute key unmutes all DAW tracks.
The All key is a System 5 MC only feature that, when lit, causes knobset selection on one CM408T channel strip to be applied to
all CM408T channel strips. This key functions in Nuendo and Pyramix only.
The right unmarked key is currently not implemented.
Monitors section
Clear and All Keys