User guide

MC Pro User Guide54
Control Room
The touch-sensitive knob controls the overall Control Room volume. The level is shown in the LED display to the right of the
knob. The source is displayed in the lower LED display.
Main Spkrs, Alt 1 Spkrs, Alt 2 Spkrs
These buttons switch the main Control Room feed between three sets of speakers:
Main Spkrs Up to 5.1 channels of Control Room Monitor Out.
Alt1 Spkrs Up to 5.1 channels of Control Room Monitor Out.
Alt2 Spkrs Stereo Control Room Out.
The selected source is displayed in the LCD to the right of the knob. Use SME to configure the Main, Alt1, and Alt2 audio sources.
Dim and Cut
The Dim key reduces the Control Room monitor level by a user-specified amount. While Dim is engaged, moving of the Control
Room knob adjusts the dim amount. Dim amount can also be adjusted in SME.
The Cut key turns off the Control Room output.
Control Room Setup
This key opens the Control Room Setup Touchscreen. This selects the source for the Control Room feed, selects a folddown matrix,
solos speakers, and sets the dim and talkback mic levels.
For more information on the features in this panel, see “MC Control Room and Monitor Setup” on page 75.
Control Room section
Control Room Setup touchscreen