User guide

Chapter 7: Working with Channels 45
Chapter 7: Working with Channels
Channel Strips
The MC has four channel strips to which workstation tracks can be assigned. The track names assigned to these strips are dis-
played in the top-right corner of the Main-Tracks touchscreen. Workstation tracks can be assigned to the strips using the Channel
Select and Wave strip keys, or using the Layouts-Assign Touchscreen. The System 5 MC has two motorized joystick panners in
place of the four faders.
Solo
When activated, this button solos the assigned channel. Solo preferences are set on the Preferences-Solo Touchscreen.
On
The On key must be lit (active) to hear the channel. The channel is muted when its On button is unlit.
Record
Press the Record key to enable (arm) a track for recording.
Channel Strips Section