User guide

MC Pro User Guide38
To lock a section:
1 Bring into focus the application to which you intend to lock a section. The application is listed at the top-left corner of the MC
touchscreen.
2 Press the Setup button of the MC section (Left Edit, Soft Key, or Right Edit) being locked.
3 Press the Strip Control Setup button to select the faders/joystick panners to lock.
4 Touch the Lock Section button to lock the section to the application on the MC’s current workstation.
The selected section is shown at the top-left of the Locking tab Touchscreen. If that section is currently locked, the top button
of the Locking tab changes from Lock Section to Unlock Section with a red lock icon to its left. The application and workstation
to which the section is locked are listed to the right of the button.
A locked Soft Key section retains its currently assigned commands until it is unlocked or its individual App Set sections are un-
locked.
The fader/joystick section retains its channel control when locked.
The Monitor and Control Room sections continue to monitor the outputs/application they were locked to.
Press the Unlock All Appset Sections button (appears only when one or more Soft Key sections are locked) to unlock all currently
locked Soft Key sections, without unlocking the fader/joystick, monitors, or control room sections.
Press Unlock All Sections to unlock all currently locked sections.
To quickly lock a section to an application, put the application in focus, hold down the Shift key on the MC keyboard, and press
Setup to lock. To unlock, repeat this step.
If any Soft Key section is locked, the Application Set cannot be edited and Soft Key definitions cannot be changed. All Soft Key
(App Set) sections must be unlocked before changing Soft Key definitions.
Locking Procedures