User guide

MC Pro User Guide34
This Touchscreen sets a Soft Key to jump to a specific Soft Key bank and determines which MC Soft Key sections are affected by
that bank switch.
Touch the Action button to change the bank switch action. A pop-up menu selects the next, previous, or another bank. The cur-
rent bank is shown to the left above the image of the Soft Key being edited.
When the Action button is set to Jump To Bank, enter the desired bank number in the command box below the Action button.
Touch the Section button to choose which section should switch banks. A popup menu chooses between the Left Edit, Right Edit,
or Soft Key sections. This functionality allows the Soft Key command to change only one of the MC Soft Key sections to another
bank (such as the Right Edit changes from Transport to Edit controls) while having no effect on the other Soft Key sections.
Assigning a Bank Jump function to Soft Key does not automatically generate its label. See “Label” on page 36 to assign an appro-
priate label to the Soft Key.
Setup-Bank Switch Commands Touchscreen