User guide

MC Pro User Guide30
Soft Keys Setup
Press the main Soft Keys Setup button (bottom-right of the Soft Keys section) to configure the main Soft Keys. The Right/Left Edit
section Soft Keys can be changed by pressing that section’s Setup button. The Touchscreen changes to show the Soft Keys setup.
The Commands and Labels tabs of the Soft Keys Setup Touchscreen edit the definitions and labels of the Soft Keys. Press the Soft
Key to modify; it begins flashing. The Commands and Labels tabs display the Soft Key’s currently assigned commands and labels,
which can now be modified.
Commands
Four types of commands can be mapped to a Soft Key:
Key Macro commands made up of computer keyboard (ASCII) characters.
EUCON Mapped from MC directly into application using EUCON.
Soft Key Bank Switch Enable navigation to MC Soft Key banks.
MC MC specific commands are Layout Recall, Parameter Collect, Parameter Punch, Read/Write All and Pause.
Each Soft Key can contain one EUCON command and unlimited bank switch and key commands chained together in the Soft
Key definition. The one EUCON command can be assigned in any slot. The commands assigned to the selected Soft Key are listed
by type in the three slots to the left of the Add button. Touch the arrow buttons to the right of the three slots to move back and
forth through the assigned commands. When the Soft Key is pressed, these commands are executed sequentially from left to
right.
MC commands