User guide

Chapter 2: Installation and Configuration 15
The MC Client icon is visible in the Windows Taskbar when MC Client is launched. There is no equivalent indication on the Mac.
However, if you use SME and have it set to auto-launch (in System Preferences, EUCON Preferences Pane) on this Mac, MC Client
completes loading shortly after the SME interface becomes visible. This is particularly useful if you generally use the MC with the
same workstation assignment.
If the MC reboots while connected to a workstation, MCApp relaunches, then the MC re-connects to the previously assigned
workstation without needing to press the Workstation button.
Visit Workstation
A workstation may be visited by pressing Shift+Workstation 1–4 key. Visiting is a quick way to deliver keyboard and trackball
commands to the visited Workstation without actually switching EUCON-aware workstations. For example, while working in
Nuendo, you can quickly switch to a Pro Tools workstation to dismiss an on-screen dialog or do a quick edit.
Visiting also causes the (optional) Ontrak USB to GPI (for DVI switching) to switch to the selected Workstation number.
Workstation Binding
User
Assigns
MC to WS
WS is
rebooted
MC is
rebooted
WS
becomes
available
Pressing WS
button
connects MC
to WS
Pressing WS
button
connects MC
to WS
MC
auto-
connects
to WS
MC retains
WS
assigment
WS
available
WS Not
available
Press WS
button, MC
connects to
WS
WS
assignment
retained by
MC -
Pressing WS
button
attaches MC
to WS
WS
becomes
available