User guide

MC Pro User Guide14
The Touchscreen opens and displays all workstations available on the network. Each workstation must have MC Client running
to be available to the MC.
2 Touch a Workstation Key on the left of the Touchscreen.
3 Touch the Workstation name in the list to assign it to the selected number.
4 To disconnect the MC from its current workstation, touch the Workstation key mapped to that workstation, then touch
None/Disconnect. The assignment is relinquished and the MC disconnects from the workstation.
5 To view all Workstations, use the up/down arrows to scroll.
6 Repeat Steps 2 and 3 to assign additional Workstations.
7 Press the Strip Control Setup key again to exit Workstation assignment mode.
8 Press one of the Workstations keys to connect to that Workstation.
Workstation Binding
Workstation Binding is a feature that retains workstation assignments made in the Workstations Setup Touchscreen. If you reboot
your workstation while connected to the MC, subsequently pressing the assigned Workstation button reconnects without having
to re-assign the workstation. Pressing the previously assigned Workstation button on the MC reconnects to this workstation with-
out needing to reassign. Allow time for MC Client to load as it usually takes about 15 seconds after the computer boots to the
Desktop.
Workstation Touchscreen